Français 
Deutsch 
Español 
Pусский 
中国 
Polski 
Squaring
Squaring
PROTEM squaring machines are the right solution for a wide range of applications encountered in numerous fields such as high purity (including semi-conductors), food-processing, pharmaceuticals, clean rooms, etc. Squaring corresponds to creating a land and making a flat surface on the pipe-end. Correct surfacing makes pipes easier to align. PROTEM pipe surfacing machines minimize risks of contamination inasmuch as they create chips in the form of a ribbon and not in particles.
SE60 - Tube squaring and beveling machine with pneumatic drive 730 W
10 mm (0.39") ID
60.3 mm (2.37") ODSE60-1020 - Tube squaring and beveling machine with electric drive 1050 W
10 mm (0.39") ID
60.3 mm (2.37") ODSE90NG - Tube squaring and beveling machine with pneumatic drive
10 mm (0.39") ID
90 mm (3.54") ODSE90NG-1020 - Tube squaring and beveling machine with electric drive 2800 W
10 mm (0.39") ID
90 mm (3.54") ODSE120 - Tube squaring and beveling machine with pneumatic drive 730 W
50 mm (1.97") ID
120 mm (4.72") ODSE120-1020 - Tube squaring and beveling machine with electric drive 1050 W
50 mm (1.97") ID
120 mm (4.72") ODSE219 - Od mounted beveling machine with pneumatic drive
60.3 mm (2.37") ID
219.1 mm (8.63") ODSE219-1020 - Od mounted beveling machine with electric drive 220 V
60.3 mm (2.37") ID
219.1 mm (8.63") ODSL30 - Tube squaring machine for tubes with electric drive
3 mm (0.12") ID
30 mm (1.18") ODSL60 - Od mounted facing machine for tubes with electric drive
10 mm (0.39") ID
60 mm (2.36") ODSL120 - OD clamping squaring machine for tubes with electric drive
50 mm (1.97") ID
120 mm (4.72") ODBMFM114 - Bevel, face and counterbore separately or in a simultaneous operation on tubes up to 4.5 inches
20 mm (0.79") ID
114.3 mm (4.50") ODBMFM219 - Bench Mounted Facing Machine BMFM 219 machining unit with concentric clamping device for Ø from 1" to 8.626"
25.4 mm (1.00") ID
219.1 mm (8.63") ODSE25 - Facing machine for tubes, fittings, micro fittings and elbows - Tube Facing Machine
3 mm (0.12") ID
25.4 mm (1.00") ODSE25E - Tube Facing Machine for tubes with electric drive - Tube Facing Machine
3 mm (0.12") ID
25.4 mm (1.00") ODSE25RA - Tube Squaring Machine with electric Angle Drive
3 mm (0.12") ID
25.4 mm (1.00") ODSE65 - Facing machine for tubes, fittings, micro fittings and elbows
12.7 mm (0.50") ID
60.3 mm (2.37") ODSE65E - Facing machine for tubes with electric drive
12.7 mm (0.50") ID
60.3 mm (2.37") ODSE65RA - Facing machine for tubes with electric drive
12.7 mm (0.50") ID
60.3 mm (2.37") ODSE2T - Facing machine for tubes, fittings, micro fittings and elbows
3 mm (0.12") ID
60.3 mm (2.37") ODSE2T-1020 - Facing machine for tubes with electric drive 220 V
3 mm (0.12") ID
60.3 mm (2.37") ODS18 - Tube beveling machine with pneumatic drive
14 mm (0.55") ID
42 mm (1.65") ODS18-1020 - Tube beveling machine with electric drive ID locking beveling machine with electric drive
14 mm (0.55") ID
42 mm (1.65") ODS18KH - Tube beveling machine with pneumatic drive with feed lever
14 mm (0.55") ID
42 mm (1.65") ODS18CA - Tube beveling machine with pneumatic drive with autom. clamping system
14 mm (0.55") ID
42 mm (1.65") ODS18TP - Bevelling machine for boiler & heat exchanger tubes
17.5 mm (0.69") ID
45 mm (1.77") ODSM8 Tube facing & beveling machine with pneumatic drive
8 mm (0.31") ID
32 mm (1.26") ODSM8-1020 - Tube and pipe beveler with electric drive
8 mm (0.31") ID
32 mm (1.26") ODSM8-1022 - Tube and pipe beveling machine with cordless drive
8 mm (0.31") ID
32 mm (1.26") ODUS25CH - Tube and pipe beveling machine with pneumatic drive 730 W
12.5 mm (0.49") ID
120 mm (4.72") ODUS25CH-1020 - Tube and pipe beveling machine with electric drive 1050 W
12.5 mm (0.49") ID
120 mm (4.72") ODUS25TA - Machining Unit for Fin Tubes
12.5 mm (0.49") ID
120 mm (4.72") ODUS25TP - Tube and pipe beveling machine for heat exchanger tubes beveling Cut to Length Weld Removal
25.4 mm (1.00") ID
63.5 mm (2.50") ODUS25CA - Beveling machine with automatic clamping system
12.5 mm (0.49") ID
120 mm (4.72") ODUS30CH - ID mount beveler with pneumatic drive for boiler tubes
32 mm (1.26") ID
168.3 mm (6.63") ODUS30CH-E - ID mount tube beveler with electric drive 220V
32 mm (1.26") ID
168.3 mm (6.63") ODUS30HY - ID mount tube beveler with hydraulic drive ID locking beveling machine
32 mm (1.26") ID
168.3 mm (6.63") ODUS30CA - ID mount beveler with pneumatic drive with autom. clamping system
32 mm (1.26") ID
168.3 mm (6.63") ODUS30ACC - ID mount beveler with flange resurfacing module
50 mm (1.97") ID
355 mm (13.98") ODUS40 - Tube & Pipe Chamfering Machine with pneumatic drive ID locking beveling machine
43 mm (1.69") ID
273 mm (10.75") ODUS40-1020 - Tube & Pipe Chamfering Machine with electric drive
43 mm (1.69") ID
273 mm (10.75") ODUS40-1060 - Tube & Pipe Chamfering Machine with hydraulic drive
43 mm (1.69") ID
273 mm (10.75") ODUS40CA - Tube and pipe beveling machine with pneumatic drive with autom. clamping system
43 mm (1.69") ID
273 mm (10.75") ODUS80 - ID clamping beveler with pneumatic drive
80 mm (3.15") ID
406.4 mm (16.00") ODUS80HY - ID clamping beveler with hydraulic drive
80 mm (3.15") ID
406.4 mm (16.00") ODUS80E - ID clamping beveler with electric drive
80 mm (3.15") ID
406.4 mm (16.00") ODUS150 - Tube and pipe beveling machine with pneumatic drive
150 mm (5.91") ID
610 mm (24.02") ODUS150-1020 - Tube and pipe beveling machine with electric drive
150 mm (5.91") ID
610 mm (24.02") ODUS150-1060 - Tube and pipe beveling machine with hydraulic drive
150 mm (5.91") ID
610 mm (24.02") ODUS450 - Tube and pipe beveling machine with pneumatic drive
457 mm (17.99") ID
914 mm (35.98") ODUS450-1060 - Tube and pipe beveling machine with hydraulic drive
457 mm (17.99") ID
914 mm (35.98") ODGR40 - Od mounted machining equipment for fin tubes & Waterwall Cutout Windows
21.3 mm (0.84") ID
60.3 mm (2.37") ODGR76 - Od mounted machining equipment Waterwall Cutout Windows
38 mm (1.50") ID
76 mm (2.99") ODGR90 - Outside clamping machining equipment for fin tubes & Waterwall Cutout Windows
42.2 mm (1.66") ID
89 mm (3.50") ODGR120 - Od mounted machining equipment Waterwall Cutout Windows
48.3 mm (1.90") ID
114.3 mm (4.50") ODMF170 - mobile tube cutting and beveling machine
60.3 mm (2.37") ID
168.3 mm (6.63") ODMF420 - mobile tube cutting and beveling machine
168.3 mm (6.63") ID
420 mm (16.54") ODO-HSB-C-6-14 - Beveling and surfacing unit for tubes of 6" to 14"
152.4 mm (6.00") ID
355.6 mm (14.00") ODPFM-414 - Pipe Facing Machine PFM for Ø ranging from 4" to 14"
101.6 mm (4.00") ID
355.6 mm (14.00") ODPFM-1222 - Pipe Facing Machine PFM for Ø ranging from 12" to 22"
323.9 mm (12.75") ID
558.8 mm (22.00") ODPFM-1030 - Pipe Facing Machine PFM for Ø ranging from 10" to 30"
273.1 mm (10.75") ID
762 mm (30.00") ODPFM-3038 - Pipe Facing Machine PFM for Ø ranging from 30" to 38"
762 mm (30.00") ID
965 mm (37.99") ODPFM-3848 - Pipe Facing Machine PFM for Ø ranging from 34" to 48"
965 mm (37.99") ID
1219.2 mm (48.00") ODPFM-4656 - Pipe Facing Machine PFM for Ø ranging from 46" to 56"
1168.4 mm (46.00") ID
1422.4 mm (56.00") ODPFM-5464 - High Speed Bevelers for pipes ranging from 54" to 64"
1371.6 mm (54.00") ID
1625.6 mm (64.00") ODPFM-6272 - Pipe Facing Machine PFM for Ø ranging from 62" to 72"
1574.8 mm (62.00") ID
1828.8 mm (72.00") ODUS600R - Pipe beveler for very heavy wall thicknesses
600 mm (23.62") ID
1500 mm (59.06") ODBB-1-6 - High Speed Beveling Bench for pipes ranging from 1" to 6’’
25.4 mm (1.00") ID
168.3 mm (6.63") ODBB-3-16 - Automatic Bench machine for pipes ranging from 3" to 16’’
88.9 mm (3.50") ID
406.4 mm (16.00") ODBB-12-24 - High Speed Beveling Bench for pipes ranging from 12" to 24’’
304 mm (11.97") ID
609 mm (23.98") ODBB-24-36 - Automatic Beveling Bench machine for pipes ranging from 24" to 36’’
609 mm (23.98") ID
914 mm (35.98") ODBB-36-48 - High Speed Beveling Bench for pipes ranging from 36" to 48’’
914 mm (35.98") ID
1219 mm (47.99") ODCTA-1-4 - High Speed cutting and beveling machine for pipes ranging from 1" to 4"
25.4 mm (1.00") ID
114 mm (4.49") ODCTA-2-6 - Automatic cutting and beveling machine for pipes ranging from 2" to 6"
60.3 mm (2.37") ID
152.4 mm (6.00") ODCTA-2-12 - High Speed cutting and beveling machine for pipes ranging from 2" to 12"
60.3 mm (2.37") ID
304.8 mm (12.00") ODCTA-6-16 - Automatic cutting and beveling machine for pipes ranging from 6" to 16"
168.3 mm (6.63") ID
406.4 mm (16.00") ODCTA-12-24 - High Speed cutting and beveling machine for pipes ranging from 12" to 24"
323.9 mm (12.75") ID
610 mm (24.02") ODCTA-16-30 - Automatic cutting and beveling machine for pipes ranging from 16" to 30"
406.4 mm (16.00") ID
762 mm (30.00") ODS18-1022 Tube beveling machine with cordless drive
14 mm (0.55") ID
42 mm (1.65") OD